mil-c-24308 d-subminiature www.glenair.com e-mail: sales@glenair.com a-22 glenair, inc. ? 1211 air way ? glendale, ca 91201-2497 ? 818-247-6000 ? fax 818-500-9912 ? 2004 glenair, inc. printed in u.s.a. cage code 06324 t top entry e end entry s side entry emi gasket (optional) length h cable range 1.300 (33.3) max shell i.d. shell i.d. 1.300 (33.3) max 1.300 (33.3) max shield sock: single layer tinned copper braid 550 t 007 m 2 f0 b 1- 02- 24 basic part no. cable entry style t = top s = side e = end basic part number finish symbol (page 3) shell size (table i) 550-007 emi/rfi d-subminiature split backshell with pre-terminated overall shield sock shell size 1 2 3 4 5 6 * com?l shell size ref e/09 a/15 b/25 c/37 d/50 f/104 entry style t (ref) shell i.d. .250 (6.4) .375 (9.5) .475 (12.1) .475 (12.1) .575 (14.6) 1.000 (25.4) entry style e shell i.d. .375 (9.5) .375 (9.5) .475 (12.1) .475 (12.1) .575 (14.6) n/a h ref .940 (23.9) .940 (23.9) 1.060 (26.9) 1.060 (26.9) 1.195 (30.4) 1.594 (40.5) 1. metric dimensions (mm) are indicated in parentheses. 2. do not use connectors with float mountings. 3. overall shield sock material: tinned copper braid per qq- b-575. shield sock length (in inches) 6 inch minimum order length cable entry dash no. (table ii) 0 = without emi gasket, 1 = with emi gasket jackscrew type (page a-4) receptacle mounting (right page) cc = cable-to-cable mounting f0 = front mounting r1-r9 = rear mounting table i: shell size & entry style * shell size 6 available in top entry only. cable entry .250 (6.4) .375 (9.5) .500 (12.7) .625 (15.9) .750 (19.1) .812 (20.6) .875 (22.2) .938 (23.8) 1.000 (25.4) dash no. 02 03 04 05 06 07 08 09 10 table ii: cable entry
mil-c-24308 d-subminiature d-subminiature split backshells standard dimensions 1. metric dimensions (mm) are indicated in parentheses. shell size 1 2 3 4 5 6 common connector/shell interface & backshell dimensions com?l shell size ref e/09 a/15 b/25 c/37 d/50 f/104 p .730 (18.5) 1.050 (26.7) 1.594 (40.5) 2.240 (56.9) 2.140 (54.4) 2.240 (56.9) r ref .719 (18.3) .719 (18.3) .938 (23.8) .938 (23.8) .938 (23.8) 1.094 (27.8) a max 1.393 (35.4) 1.706 (43.3) 2.265 (57.5) 2.900 (73.7) 2.800 (71.1) 2.900 (73.7) b max .624 (15.8) .624 (15.8) .624 (15.8) .624 (15.8) .750 (19.1) .844 (21.4) c ref. .312 (7.9) .312 (7.9) .312 (7.9) .312 (7.9) .375 (9.5) .422 (10.7) d .005 (.1) .984 (25.0) 1.312 (33.3) 1.852 (47.0) 2.500 (63.5) 2.406 (61.1) 2.500 (63.5) t - top entry e - end entry jackscrew types b, d, h, k and j only (page a-4) termination type shrink sleeve (as required) termination type e d c b f r p e g a a .12 (3.0) ref. dash no. cc f0 r1 r2 r3 r4 r5 r6 r7 r8 r9 cable mounting and backshell dimensions panel thickness n/a n/a .031 (.8) .047 (1.2) .062 (1.6) .093 (2.4) .104 (2.6) .125 (3.2) .156 (4.0) .135 (3.4) .188 (4.8) e .174 (4.4) .343 (8.7) .247 (6.3) .231 (5.9) .216 (5.5) .185 (4.7) .174 (4.4) .153 (3.9) .125 (3.2) .140 (3.6) .094 (2.4) sizes 1 & 2 1.451 (36.9) 1.625 (41.3) 1.525 (38.7) 1.509 (38.3) 1.500 (38.1) 1.470 (37.3) 1.451 (36.9) 1.430 (36.3) 1.400 (35.6) 1.417 (36.0) 1.368 (34.7) sizes 3 - 5 1.671 (42.4) 1.844 (46.8) 1.745 (44.3) 1.728 (43.9) 1.720 (43.7) 1.690 (42.9) 1.671 (42.4) 1.650 (41.9) 1.620 (41.1) 1.637 (41.6) 1.590 (40.4) sizes 1 & 2 1.583 (40.2) 1.750 (44.5) 1.656 (42.1) 1.640 (41.7) 1.625 (41.3) 1.594 (40.5) 1.583 (40.2) 1.563 (39.7) 1.531 (38.9) 1.550 (39.4) 1.500 (38.1) sizes 3 - 5 1.831 (46.5) 2.000 (50.8) 1.904 (48.4) 1.888 (48.0) 1.873 (47.6) 1.842 (46.8) 1.831 (46.5) 1.811 (46.0) 1.781 (45.2) 1.798 (45.7) 1.750 (44.5) f g size 6 1.820 (46.2) 2.000 (50.8) 1.890 (48.0) 1.875 (47.6) 1.860 (47.2) 1.829 (46.5) 1.820 (46.2) 1.798 (45.7) 1.767 (44.9) 1.805 (45.8) 1.740 (44.2) www.glenair.com e-mail: sales@glenair.com a-23 glenair, inc. ? 1211 air way ? glendale, ca 91201-2497 ? 818-247-6000 ? fax 818-500-9912 ? 2004 glenair, inc. printed in u.s.a. cage code 06324 jackscrew types b, d, e, h, k (page a-4) s - side entry f e jackscrew types b, d, e, h, k (page a-4)
|
